ServicesEquipment Sales
Loading Dock Equipment Sales in Lehighton
When a dock leveler, vehicle restraint or overhead door is truly past repair, we help you pick new equipment that fits your trailers, your dock height and the way your crew works. You get a straight answer on repair first, then a clear written quote.
New equipment, only when it makes sense
We supply dock levelers, vehicle restraints, overhead doors, high speed doors and rolling grilles for the facilities that keep freight moving, from busy distribution centers to a grocery store with a single receiving door. Plenty of calls that begin as a buying question end with us taking a hard look at what you already own. A leveler with a worn lip hinge or a leaking hydraulic cylinder can often be put back in service for far less than a new unit.
When replacement is the better call, we explain why in plain terms. Maybe the pit is too short for the trailers you receive now, the parts are no longer made, or repair bills keep stacking up on the same unit. Then we help you choose equipment sized to your traffic and budget, and our crew can handle the work through our loading dock equipment installation service.
Cold winters and salt-crusted trailers are hard on dock gear around Lehighton, so we factor that into what we suggest, such as sealed hydraulics, coated or galvanized finishes and insulated doors where heat loss costs you.
What you get when you buy through us
- 01
A look at your current equipment first
Before we quote anything new, we check whether a repair would get you more good years. If it will, we say so and quote the repair instead.
- 02
Measurements taken at your dock
We measure dock height, pit size, door openings and the bed heights of the trailers you actually see. We also ask about load weights and forklift traffic so the capacity is right.
- 03
Options explained without jargon
Hydraulic, mechanical and air-powered levelers each have trade-offs in upkeep and cost. So do hook-style versus wheel-based restraints, and standard overhead doors versus high speed doors. We lay those out so you can decide with the facts in front of you.
- 04
A written, line-item quote
Equipment, removal of the old unit, installation and any electrical or concrete work are listed separately. You can see where every dollar goes.
- 05
Delivery and install planned around your shifts
We schedule the work dock by dock so receiving keeps moving and downtime stays short.
- 06
Care after the sale
New equipment lasts longer with regular attention. Our loading dock preventative maintenance visits keep it adjusted, lubricated and safe.
Questions about Equipment Sales?
Call(570) 672-5987Signs it may be time to buy new dock equipment
The same repair keeps coming back
If a leveler or door needs the same fix every few months, the underlying wear is usually beyond patching. We will show you the pattern so the decision is clear.
Parts are hard to find
Older units built on lines the maker has dropped can leave a dock out of service while you hunt down one small component. That lost dock time often outweighs the cost of new equipment.
Your trailers have changed
Reefers, low-bed trailers and box trucks may not line up with a leveler built for a different fleet. A unit with the wrong range forces steep ramps and rough transitions for forklifts.
Gaps in dock safety
Relying only on wheel chocks, or running doors without interlocks, leaves room for trailer creep and early pull-aways. A vehicle restraint is often the upgrade that closes that gap.
Cracked decks or bent frames
Structural damage to a deck plate, lip or door track can be unsafe to keep using. Some of it can be welded or rebuilt, and some cannot. We will tell you which.
How buying equipment with us works
- 1
You call and tell us what is going on
We ask about the problem, your trailer mix and how busy the dock gets. That helps us come prepared.
- 2
We visit and assess the dock
We inspect the existing equipment, take measurements and photograph what we find. A repair option is always on the table at this stage.
- 3
You get a written recommendation
We explain repair versus replace, offer a couple of equipment options where it makes sense and give you a line-item quote. No pressure to decide on the spot.
- 4
We order and schedule
Once you approve, we order the equipment and share the expected lead time. Install dates are set around your shifts and receiving windows.
- 5
Install, test and walk-through
After installation we test every function and show your crew how to operate it safely, including any interlocks between the restraint, leveler and door.
What affects the price of new dock equipment
Every dock is different, so we price equipment after we have seen yours. The quote breaks out each piece so nothing comes as a surprise. Here is what tends to raise or lower the total.
- Type of equipment and rated capacity
- A hydraulic leveler rated for heavy forklift loads costs more than a lighter mechanical unit. We size capacity to your real loads, not the biggest number available.
- Fit with your pit or opening
- Standard sizes are simpler. Odd pit dimensions or unusual door openings can mean special-order equipment or modifications.
- Power, controls and interlocks
- Powered levelers, restraints and high speed doors need electrical supply and control panels. Linking them together with interlocks adds safety and some cost.
- Removal and site work
- Taking out old equipment, repairing a damaged pit edge or patching concrete is listed on its own line so you can see it.
- Finishes and options
- Galvanized finishes, insulated door panels, dock lights and signal systems all change the price. We explain which ones earn their keep at your facility.
Questions about buying dock equipment
Will you try to sell me equipment I don't need?
No. We look at repair first and recommend new equipment only when repair stops making sense. If your leveler or door has good years left with a fix, we will quote the fix.
Can you match equipment to the trailers we receive?
Yes. We measure your dock height and ask about the trailers and trucks you see most. Then we suggest a leveler with the right working range and lip length so the transition stays smooth for forklifts.
Do you install the equipment you sell?
Yes. Our loading dock equipment installation service covers removal of the old unit, setting the new one and testing it. Keeping sale and install with one crew means one point of contact from start to finish.
How soon can new equipment arrive?
It varies with the kind of equipment and the options you pick, so a standard leveler and a custom-sized door are on different schedules. We put an expected timeline in writing with your quote. If the dock has to stay in use until then, we can often keep the old unit working with a temporary repair.
Can we update one dock position at a time?
Yes, and many facilities prefer it. Phasing the work keeps receiving open and spreads out the cost.
Can a new vehicle restraint work with our existing leveler and door?
Often it can. We check your current controls and wiring, then tell you whether an interlock with your existing equipment is practical or whether a control upgrade is needed.
Not sure whether to repair or replace?
Tell us what is happening at your dock and we will give you an honest read. If a repair will do the job, that is what we will recommend.